anvilfire.com flaming anvil trademark logo copyright (c) 1998 Patrick J. Dempsey
     HOME!   |   STORE   |   Getting Started in Blacksmithing    
 
   Guru's Den   
   Slack-Tub Pub II   
   Tailgate Sales   
   FAQs   
   Glossary   
   Plans   
   Armoury   
   iForge How-To    
   Health and Safety   
   Book Reviews    
   eBooks On-line   
   Anvil Gallery   
   Vice Gallery   
   Story Page   
   AnvilCAM - II   
  Touchmark Reg.  
   Power Hammers   
   What's New   
Comic of the Week
   Daily Comics   
Daily Metalworking Comics!
   Webring Nexus   
   Our Sponsors   

Tell them you found it on anvilfire.com!

Anvils in America, THE book about anvils

Blacksmithing and metalworking questions answered.



Blacksmithing and Metalworking Tools Historical Preservation.

International Ceramics Products

Jeweler Saw Blade Specifications:

Sizes and Recommended Material Thicknesses

Table data provided by Terry L. Ridder

iForge #87 Heart Spatula Demo Fig. 12 - (c) Jock Dempsey iForge #87 Heart Spatula Demo Fig. 13 - (c) Jock Dempsey iForge #87 Heart Spatula Demo Fig. 14 - (c) Jock Dempsey

Jeweler Saw Blade Specifications
Blade
Size
Blade
Thickness
Blade
Depth
Teeth
per Inch
Recommended
for B&S Gauge
Drill Size
for Piercing
8/0 .0063" .0126" 89.0 up to 26 80
7/0 .0067" .0130" 84.0 24 - 26 80
6/0 .0070" .0140" 76.0 24 79
5/0 .0080" .0157" 71.0 22 - 24 78
4/0 .0086" .0175" 66.0 22 77
3/0 .0095" .0190" 61.0 22 76
2/0 .0103" .0204" 56.0 20 - 22 75
1/0 .0110" .0220" 53.5 18 - 22 73
1 .0120" .0240" 51.0 18 - 20 71
2 .0134" .0276" 43.0 16 - 18 70
3 .0140" .0290" 40.5 16 - 18 68
4 .0150" .0307" 38.0 16 - 18 67
5 .0158" .0331" 35.5 16 65
6 .0173" .0370" 33.0 14 58
7 .0189" .0400" 30.5 12 57
8 .0197" .0440" 28.0 12 55

References and Links


2002 Jock Dempsey, www.anvilfire.com


Copyright © 1998, 2024 anvilfire.com