flaming anvil trademark logo copyright (c) 1998 Patrick J. Dempsey
     HOME!  |  STORE  |  Getting Started in Blacksmithing  

Hand Forging by Thomas F. Googerty

RIVETING, finish, tools, welded, tenon, riveted, angle plate, corner
   About the Book   
   Book Cover   
   Table of Contents   
    < PREV          NEXT >   

    < PREV          NEXT >   

RIVETING 107 set is used to finish it. See Fig. 62 for these tools. Corners of frames are also riveted instead of welded. They may also be made with a tenon and then riveted, or an angle plate may be riveted on a corner. Rivet heads may be made in any shape in order to get a pleasing effect. In Fig. 63 various methods of riveting are illustrated.

Page Counter All Page Counter General Site
Copyright © 2009