flaming anvil trademark logo copyright (c) 1998 Patrick J. Dempsey
     HOME!  |  STORE  |  Getting Started in Blacksmithing  

Hand Forging by Thomas F. Googerty

BOX FORGING, p.133, hammered, block, concave, form, countersunk-head, screws
   About the Book   
   Book Cover   
   Table of Contents   
    < PREV          NEXT >   

    < PREV          NEXT >   

BOX FORGING 133 is heated and hammered over the edge of the block, bending it to an angle of 45 degrees. When this is done the corners are hammered square, at the same time giving it the concave form as shown in the cut. When finished it is fastened with countersunk-head screws.

Page Counter All Page Counter General Site
Copyright © 2009