anvilfire.com flaming anvil trademark logo copyright (c) 1998 Patrick J. Dempsey
     HOME!  |  STORE  |  Getting Started in Blacksmithing  
 

Hand Forging by Thomas F. Googerty

EMBOSSED WORK, p.149, jaw, leaf, bar, flux, leaf, Fig. 96, Border, Marble, Table-Top, raised, welded, anvil, horn, hammer, raising, welding, tines
   About the Book   
   Book Cover   
   Frontispiece   
   Table of Contents   
    < PREV          NEXT >   



    < PREV          NEXT >   

EMBOSSED WORK p.149 so that one jaw will bear on the leaf and the other on the bar. The blast is turned on slowly, bringing the whole to a red heat. A little flux is then put onto the top part of the leaf and the heat Fig. 96. Border for Marble Table-Top raised. It is welded on the anvil horn with a small hammer. In raising the heat to the welding point care must be taken not to burn the tines of the leaf.

Page Counter All Page Counter anvilfire.com General Site
Copyright © 2009 anvilfire.com