anvilfire logo (c) 1998 by Patrick Dempsey
anvilfire home
anvilfire! News
Reporting Blacksmithing News When it Happens
Coat of Arms from the town of  Eskilstuna, Sweden
Eskilstuna
Volume 10 - Page 8
International Edition
Nick Vincent at MASA / CVBG Meet
Nick Vincent of Nathan's Forge, Uniontown, PA,

Nick produces forged hardware in quantity. He demonstrated several techniques including a number of special dies for use in the power hammer. He also tried to demonstrate the use of a Donald Streeter type hinge bender which he had given up on and instead had a local machine shop press brake his hinge loops. It never hurts to look for someone that can do a job cheaper and faster than you can!
Nick forging on the Kuhn air hammer. In the forground is a Grant Sarver "rope" die that Nick demonstrated for making drawer pulls. A short piece of stock square stock was forged with the dies, twisted and then the squared ends drilled for screws that went through stand offs.
Page 1   Previous   - Page 8 - Next Page
| Anvilfire Home | Guru's Den | V. Hammer-In | Slack-Tub Pub | Power hammer Page |
| What's New! | Links | Web Ring Nexus |
February 1st International Edition.
Copyright ©1999 Jock Dempsey