ITC 100 HT Ceramic Coating
Our most versatile high temperature coating has proven to achieve outstanding energy
savings and refractory protection.
Use it alone and as a base coat for other ITC products.
Applications include coating Kaowool, Inswool or other soft friable refractories including lightweight castable and insulating bricks to make a hard reflective surface.
It improves the IR reflectivity of Satanite forge linings.
Stocked in pint jars and half gallon buckets. Gallons available on order.
Directions
 |
Prepare Surface: Remove all loose and weakened fiber and bricks,
debris, particles, dust and grease from interior walls, door, crown, floor and grooves
behind electrical elements. Immediately before applying ITC-100, dampen these areas by
spraying lightly with water.
|
|
Mix:
To one pint of ITC-100 add one-half pint of water and mix well.
|
|
Apply: Spraying is the best method of application.
Sprayguns are available from ITC. For small applications a brush can be used.
Dip the brush in water first each time.
|
|
Coverage: 50 to 100 sq. ft. per gallon (6 to 12 sq.ft per pint).
|
|
[ Application Details ] :
Click for more information.
|
|
[ ITC-100 MSDS ] :
Click for Material Safety Data Sheet. |
|
