|
Aluminium Smelters
|
| Repair and maint. brick, fiber and castables in contact with molten aluminium. |
ITC-100, 148, 296A |
| Repair and maint. brick, fiber and castables on doors and above molten metal. |
ITC-100, 200, 296A |
| Repair and maintain furnace door jambs |
ITC-100, 148 |
| Repair and maintain crucibles, pouring ladles and troughs |
ITC-100, 148, 296A |
| Minimize dross buildup and carbon deposits on metal |
ITC-213, 296A |
| Protect graphite pumps and graphite parts used in molten metals |
ITC-213, 100, 296A |
| Protect and prolong thermocouple life |
ITC-213, 296A |
| Repair burner blocks |
ITC-100, 200 |
|
Die Casters
|
| Save fuel |
ITC-100, 200, 296A |
| Repair and maintain refractory |
ITC-100, 200, 296A |
| Minimize seeding, peeling, chipping, dusting and cracking of refractory |
ITC-100, 200, 296A |
| Protect metal utensils such a ladles, skimmers, thermocouples |
ITC-213, 296A |
| Repair burner blocks |
ITC-100, 200 |
|
Steel Foundries
|
| Repair and maintain tundish |
ITC-100, 148, 296A |
| Minimize slag buildup on metal equipment |
ITC-213, 296A |
| Repair and protect metal molds |
ITC-213, 296A |
| Repair and maintain crucibles, ladles and pouring troughs |
ITC-100, 148, 296A |
| Prolong electrical element life |
ITC-213, 296A |
| Spray coating for sand molds |
ITC-213, 296A |
|
Forge and Blacksmith
|
| Repair and maintain refractory fiber, castables and brick forge linings |
ITC-100, 200 |
| Seal refractory fiber blanket and increase infrared reflectance |
ITC-100, 296A |
| Repair and protect burner nozzles and tuyeres |
ITC-213, 296A |
| Protect metal ladles, skimmers and pipe crucibles |
ITC-213, 100, 296A |
| Coat parts for heat treating |
ITC-213, 100 |
| Prevent oxidation of exotic metals |
ITC-213 |
|
Heat Treaters
|
| Save fuel, improve uniformity of temperature |
ITC-100, 200, 296A |
| Repair brick or fiber in furnaces |
ITC-100, 200 |
| Prolong electrical element life |
ITC-213, 296A |
| Protect fans retorts and other metal parts |
ITC-213, 296A |
| Mend cracked steel in ovens |
ITC-213, 296A |
| Repair burner blocks |
ITC-100, 200 |
| Reduce recovery time |
ITC-100, 200, 296A |
|
Potters, Artists, Porcelain, Brick and Tile Manufacturers
|
| Save fuel, cut down firing times, improve uniformity of temperature |
ITC-100, 200, 296A |
| Repair brick and fiber in kilns |
ITC-100, 200 |
| Minimize kiln dirt and improve ware quality |
ITC-100, 296A |
| Minimize glaze sticking to shelves and kiln furniture |
ITC-100, 296A |
| Prolong electrical element life |
ITC-213, 100, 296A |
| Protect metal sand seals on car bottoms and metal burner tips |
ITC-213, 296A |
| Repair burner blocks |
ITC-100, 200 |
|
Power Plants, Paper Mills & Incinerators
|
| Repair and prolong refractory life in furnace area and minimize ash build-up |
ITC-100, 148, 296A |
| Protect metal water and steam pipes in boiler area and minimize ash build-up |
ITC-213, 296A |
| Repair burner blocks |
ITC-100, 200 |
|
Gold, Silver & Other Precious Metals
|
| Repair and maintain crucibles and ladles |
ITC-100, 148, 296A |
| Repair and maintain graphite equipment and parts |
213, 100, 148, 296A |
|
Forge, Furnace and Kiln Construction
|
| Protect metal surfaces, door frames, tuyeers and burner nozzles |
ITC-213, 296A |
| Prime metal for application of other refractories |
ITC-213 |
| Coating and gluing fibre boards and blankets (Kaowool) |
ITC-100 |
|
|
For additional technical information and assistance. please call or write:
International Technical Ceramics Inc, PO Box 1726, Ponte Vedra, FL 32004 · 904-285-0200
|
|
[ Example Photos 1 ]
[ Example Photos 2 ]
[ ITC-100 MSDS ]
[ ITC-213 MSDS ]