flaming anvil trademark logo copyright (c) 1998 Patrick J. Dempsey
     HOME!  |  STORE  |  Getting Started in Blacksmithing  

Hand Forging by Thomas F. Googerty

p.156, HAND FORGING, brazed, spelter, elliptical, receiver, base, square stock, candlestick, riveted, socket, Fig. 103
   About the Book   
   Book Cover   
   Table of Contents   
    < PREV          NEXT >   

    < PREV          NEXT >   

156 HAND-FORGING bending a piece of No. 20 soft steel in cylinder shape, letting the edges butt together. It is then brazed with spelter; afterward it is formed elliptical. The bottom is fitted and brazed. To fasten receiver and base together 3/8-in. square stock is used. The base of the candlestick is round, with the stem riveted into it. The socket to hold the Fig. 103. Candlestick with Raised Projections at Corner of Base

Page Counter All Page Counter General Site
Copyright © 2009